View Single Post
Old 12-10-2004, 08:34 PM   #6
crazy longhorn
Fabricate till you "puke"
 
Join Date: Jun 2002
Location: Ill
Posts: 9,403
Choptop, im not sure about all the flow #, but feel that there was more power in the old "fuelie" heads......maybe partly due to higher comp ratio? i ran a set of 492"s (Z28/LT1 castings) , on a .040 over 327.....with a very mild cam, that little booger ran like stink! the cam was 216 dur @ .050, & mid .450 on lift.....with a 3.73 gear set, & a saginaw 4spd, with a 3.50 1st gear.....that 1/2 ton truck really didnt care if she was running empty & smokin hides, or pullin 10-12,000 lbs crazyL
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....
crazy longhorn is offline   Reply With Quote