Quote:
Originally Posted by First c10
ok thanks my 68 does not have it. I did notice that the shackle bolt hole was a little oval. I may have to weld it up or enlarge the bolt size.
also,
Has anyone worked on the LS oil pump from the front? I want to button up the motor but not sure if there is something I should do before I closer up!
|
if the hole for the leaf spring is olval the easiest way to correct it would be to weld washer on each side and maintain the bolt size. other wise you will have to mess with the bushings in the springs.
as for the oil pump make sure the pick up is were it should be then you can cover up.