The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

First c10 · 04-05-2015, 10:33 PM

Got a little work done on the truck. Was able to remove the front crossmember that was loose and install the square body sway bar brackets and was able to reinstall the cross member without any modification. Not sure how but It worked. I drilled and installed extra bolt in the sway bar bracket to the frame and to the cross member. So looking at it it probably is about 3 times stronger now. When the steering box support comes in it will really be tough.

04-05-2015, 10:33 PM	#90
First c10 Registered User Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Re: Project 68 k10 LWB..aka "The Hulk" Got a little work done on the truck. Was able to remove the front crossmember that was loose and install the square body sway bar brackets and was able to reinstall the cross member without any modification. Not sure how but It worked. I drilled and installed extra bolt in the sway bar bracket to the frame and to the cross member. So looking at it it probably is about 3 times stronger now. When the steering box support comes in it will really be tough. Attached Images __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!!