|
Re: PCV with turbo setup HELP
Quote:
Originally Posted by Buickwc67
Nice! This is exactly how I have my system set up with the exception of the hose (clean side) going to turbo filter. Would having that port blocked off cause oil to leak out of my turbo?
|
you need to get fresh air from somewhere. So depending on what you mean by blocked off, if you just have the hose going to atmosphere with a filter then you should be ok if you don't have anyplace for the engine to get air that wont work. Hope I said that correct and understandable.
If I remember correctly I have mine like above but I am just pulling the air without it connected to the filter system. I will assume the way it is shown above it will create a slight vacuum under acceleration thru that hose as the air is drawn over the intake port.
Clear as mud...?
Dave
__________________
Dave
1968 Custom Chevy with turbo charged 5.3 gen III 4l80e swap
1967-71 GMC 3/4 ton long step 4x4 (not sure what year exactly?)
"A good friend will bail you out of jail...but a true friend will be sitting next to you saying "that was frekin awesome".
"If it doesn't fit force it...If it breaks then it needed to be replaced anyway!"
|