The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 68 C10 Yellow wire from firewall to starter/coil.

Happy_dan · 10-19-2019, 04:48 PM

I don't have a tach in my truck. I ddid read there are issues with tachs and p-iii

I have another question. Never saw these types of connectors before.

Can I plug a connector into the end of this that is open and use it for the coil? It would be two devices. The pink looks like it goes to the tranny kick down.

Or should I use the spot next to it and what kind of connector do I put on there?

Finally, what size are the glass fuses. I don't have any of those and want to get some spares but not sure on the size. I see 1/4 x 1/4, 35MM etc.

10-19-2019, 04:48 PM	#63
Happy_dan Registered User Join Date: Jul 2019 Location: New Boston, NH Posts: 456	Re: 68 C10 Yellow wire from firewall to starter/coil. I don't have a tach in my truck. I ddid read there are issues with tachs and p-iii I have another question. Never saw these types of connectors before. Can I plug a connector into the end of this that is open and use it for the coil? It would be two devices. The pink looks like it goes to the tranny kick down. Or should I use the spot next to it and what kind of connector do I put on there? Finally, what size are the glass fuses. I don't have any of those and want to get some spares but not sure on the size. I see 1/4 x 1/4, 35MM etc. __________________ 1968 C-20 CST Vermillion http://imageevent.com/happy_dan/dantoys/68c20 2019 Silverado 2012 Camaro ZL1