That last several months have been very busy getting the Ponderosa ready for SEMA. The pictures will tell a good story below but we are getting close.
First the B pillar and a large portion of the sheet metal work is done. The 5.9 Cummins valve covers have been over to Spectrum Powder Coating for coat of custom green to contrast with the GenRock light green by Lusid Technologies. I also did the motor mounts to the same green hammered and have even had them coat the injector lines a metal flake silver with hints of green to have it pop under the lights or in the sun. There is 3 inches to spare behind the motor and plenty of room under the hood so I am designing a liquid to air intercooler.
I'm having Joe at
Cinderella Customs do the painting and
Stitchwurx is doing the upholstery.
As it is now the height is about 8' and the length is around 20'.