The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

MP&C · 07-04-2016, 01:41 PM

...and now for the battery tray, shown here cut to size and sides folded up...

For the end folds, the cut was started using a .035 cutoff wheel..

...and our trusty jig saw again...

Both ends complete, and frame holes have been piloted. Once checked to the hole spacing on the frame they can be drilled out for the 3/8 bolts.

07-04-2016, 01:41 PM	#8
MP&C Registered User Join Date: Jan 2013 Location: Leonardtown, MD Posts: 1,636	Re: 1947 Biederman Truck Fender repairs ...and now for the battery tray, shown here cut to size and sides folded up... For the end folds, the cut was started using a .035 cutoff wheel.. ...and our trusty jig saw again... Both ends complete, and frame holes have been piloted. Once checked to the hole spacing on the frame they can be drilled out for the 3/8 bolts. __________________ Robert