[44boggers]

Knocked out a little body work the last two days. Stripped down the bumper cowl or whatever it is called, the top filler panel above the bumper. My OCD kicked in hard with this one considering you only see about 10 percent of this panel once the bumper is on. But hey you never know how close you might look and cant risk seeing a wave.

So I stripped down both sides to bare metal, hit it with 2 coats of epoxy, then 3 coats of slick sand, sounded down with 80 then 180, 2 more coats of epoxy to seal it up, then 3 coats of high build primer. The panel was pretty much flawless to begin with so I will leave it in high build until its time to paint. But one more part done!