Quote:
Originally Posted by Pearly72
Alright! Grille shell and insert are on the truck. What I've learned: If your grille is off, may consider spraying with a good clear coat. When it is on the truck, this is your best bet for ease of application and quality.
I purchased an outer grille shell for my 72 a couple of years ago from a young man that was taking apart his C10 and restoring it to have GMC badging/grille. I bought it and had my buddy knock out the 2 dings on it.
Easy off, sanding (it had some decent scratches) and polished it. I put this Protectaclear on it and it isn't bad... from 2' away (which is good). I can see some flaws /runs from the peaks of the reverse V on the 71/72 grille shell. They ran down to the valley and kind of clumped up. I used a foam brush and tried to keep it as light of a coat as I could... it was hard for me.
Installed it and here's the result from 10' away. It's not bad at all! Good thing is, it's easy to take off with Xylene if I want to redo it. Overall --- pleased. Thanks Rockyrivermark!!!!!
-Garrett
|
all around Great looking Truck.....thanks for the info