The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - CA Edelbrock Torker 2R -Square Port BBC Manifold

'63GENIII · 03-16-2020, 08:54 PM

So the threads are 1/2" deep and about a 1/4" missing. Please excuse the makeshift ruler. It's fairly accurate though.

All other threaded holes are fine.

Not sure how shipping would work right now either. All 5 surrounding counties on some form of lockdown. Essential services are the only thing that are open. Maybe USPS at this point.

03-16-2020, 08:54 PM	#15
'63GENIII Registered User Join Date: Sep 2008 Location: San Carlos, Ca. Posts: 3,048	Re: Edelbrock Torker 2R -Square Port BBC Manifold So the threads are 1/2" deep and about a 1/4" missing. Please excuse the makeshift ruler. It's fairly accurate though. All other threaded holes are fine. Not sure how shipping would work right now either. All 5 surrounding counties on some form of lockdown. Essential services are the only thing that are open. Maybe USPS at this point. Attached Images __________________ Chris '63 k15 long step Vortec 7.4 - L29 Blackbear tune, Five 0 Motorsports injectors, Chris Straub Cam, NV4500, divorced 205 52" front and 63" rear spring swap D44 / 14bff - disc axles Milemarker 9K and 10.5K hydraulic winches 63" & B52 Spring Install http://67-72chevytrucks.com/vboard/s...ng+swap+thread NV4500 Reverse Build Thread http://67-72chevytrucks.com/vboard/s...=reverse+build L29 - 7.4 Vortec Build http://67-72chevytrucks.com/vboard/s...&highlight=L29