The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**raidmagic** · 07-23-2018, 08:04 PM

So I got a few hours in after work tonight. I decided it was easier to do the front suspension on the driveway so I pushed it outside and removed the springs. I then put the ball joints back in so I could roll it. I love how low it sits but that's not going to stay that way. I have some spring options. In the middle is stock on the left and right are lowering options. I am also going to add 2" drop spindles.

Now that it's back on the lift out comes the engine to make way for the new one. Also need to remove the linkages and all that won't be used but I was tired and ready to stop for the day.

07-23-2018, 08:04 PM	#5
raidmagic Senior Member Join Date: Jan 2015 Location: Tampa, Fl. Posts: 420	Re: Project daily driver So I got a few hours in after work tonight. I decided it was easier to do the front suspension on the driveway so I pushed it outside and removed the springs. I then put the ball joints back in so I could roll it. I love how low it sits but that's not going to stay that way. I have some spring options. In the middle is stock on the left and right are lowering options. I am also going to add 2" drop spindles. Now that it's back on the lift out comes the engine to make way for the new one. Also need to remove the linkages and all that won't be used but I was tired and ready to stop for the day.