The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

dsraven · 10-10-2018, 11:14 PM

yep, vintovka has it right. adjust the doors without stripping so they fit and close correctly, then install the stripping. if the doors gotta come off, drill the 1/8 holes through the door and hinge so they will line up exactly where they were when they go back on. have a buddy help so the paint doesn't get scratched moving the door off and back on. masking tape on the edges may help too, in case of the odd bump.

10-10-2018, 11:14 PM	#8
dsraven Registered User Join Date: Nov 2010 Location: calgary alberta Posts: 7,831	Re: Door Weatherstripping yep, vintovka has it right. adjust the doors without stripping so they fit and close correctly, then install the stripping. if the doors gotta come off, drill the 1/8 holes through the door and hinge so they will line up exactly where they were when they go back on. have a buddy help so the paint doesn't get scratched moving the door off and back on. masking tape on the edges may help too, in case of the odd bump.