The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Andy4639 · 11-20-2019, 07:40 PM

Passenger side old rocker is gone and part of the back cab corner. I'm not sure about the corner yet. I may cut a little more out but I don't want to use that whole big piece.
I have my good friend Jesse coming over in the morning and helping tack it all in. He retired from the local vocational school as the welder instructor. He is going to setup the machine and get everything good for me to do the drivers side.

11-20-2019, 07:40 PM	#7
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Rocker panels Passenger side old rocker is gone and part of the back cab corner. I'm not sure about the corner yet. I may cut a little more out but I don't want to use that whole big piece. I have my good friend Jesse coming over in the morning and helping tack it all in. He retired from the local vocational school as the welder instructor. He is going to setup the machine and get everything good for me to do the drivers side. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. Last edited by Andy4639; 11-20-2019 at 08:07 PM.