This is awesome. It's more a guide. For example, he doesn't differentiate 9/16" Vs 1/2", as in U-bolts. 85 ft. lb. seems pretty close regardless. His control arm bushings are a little high, but his might be original parts, Moog calls for less.
http://www.chuckschevytruckpages.com...que_specs.html
Found this here as well: Nice. Amazing how torque varies so much. Too many variables. They're quoting 7-16" and 9/16" U-bolts I bet.
For what it's worth, which isn't a lot, there's SO MANY suggestions how to torque the control arm U-bolt nuts. I read one place 75 ft. lbs for a 9/16" U-bolt, and that's where I ended up. I used anti-seize.