The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

FrankieD · 01-18-2012, 03:00 PM

I put a 72 crossmember on my 70 and the new headers fit fine a little close in the right side but didn't hit anything According to Summit they should fit 67 to 74. These are the ones I bought ( http://www.summitracing.com/parts/SU...UP&prefilter=1 ).
If you can find another 73 measure from the motor mount to the back of the cross member but if your motor mounts bolted up some thing else might be wrong. Check the motor mounts make sure one didn't collapse or soft.

Here are some pix of mine.

01-18-2012, 03:00 PM	#40
FrankieD Registered User Join Date: Jan 2011 Location: Gilberts IL. Posts: 2,488	Re: 1969 Custom/10 clean up I put a 72 crossmember on my 70 and the new headers fit fine a little close in the right side but didn't hit anything According to Summit they should fit 67 to 74. These are the ones I bought ( http://www.summitracing.com/parts/SU...UP&prefilter=1 ). If you can find another 73 measure from the motor mount to the back of the cross member but if your motor mounts bolted up some thing else might be wrong. Check the motor mounts make sure one didn't collapse or soft. Here are some pix of mine. __________________ 94 k2500 EXCab Long Bed 350ci New Toy 95 K2500 Suburban New PlowTruck 454ci Support our Troops @ http://anyairman.com http://www.woundedwarriorproject.org/ Last edited by FrankieD; 01-18-2012 at 03:22 PM.