The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - CA SBC plug wire heat shields & bracket set

**rechinca** · 06-20-2019, 04:13 PM

An almost complete set for the SBC. There are 5 of the shields, one is the correct arched shield but the tab to secure it is missing. You could cut the tab off one of the good ones and weld it on for correct shield to fit around temp/TSC sensors. 3 are original and 2 are repops. There are 2 oil pan retainers, 2 brackets for back side of the block and 2 of the 4 retainers that bolt in with the heat shields. $30 shipped.

06-20-2019, 04:13 PM	#1
rechinca Senior Member Join Date: Jul 2018 Location: Vacaville, CA Posts: 528	SBC plug wire heat shields & bracket set An almost complete set for the SBC. There are 5 of the shields, one is the correct arched shield but the tab to secure it is missing. You could cut the tab off one of the good ones and weld it on for correct shield to fit around temp/TSC sensors. 3 are original and 2 are repops. There are 2 oil pan retainers, 2 brackets for back side of the block and 2 of the 4 retainers that bolt in with the heat shields. $30 shipped. Attached Images __________________ 1971 Custom/10 - 350/3 speed, Orange/White roof