The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

b-mac · 12-22-2014, 12:27 AM

I think I know what you mean. Yes, it's a 49 Chevy on an S10 frame. Forgot to mention that. I used universal motor mounts because of the distance I had to move the engine rearward. I can't go much higher with the engine because my drive shafts is close to the floor already (I'm at about 3.5 degrees of angle on the engine.)
I'm hoping someone has an idea for a different or modified power steering pump.

12-22-2014, 12:27 AM	#3
b-mac Registered User Join Date: Mar 2014 Location: Wichita Posts: 516	Re: Steering Shaft Alignment Help I think I know what you mean. Yes, it's a 49 Chevy on an S10 frame. Forgot to mention that. I used universal motor mounts because of the distance I had to move the engine rearward. I can't go much higher with the engine because my drive shafts is close to the floor already (I'm at about 3.5 degrees of angle on the engine.) I'm hoping someone has an idea for a different or modified power steering pump.