The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

b.sharp · 06-14-2007, 02:02 PM

Thanks for posting the detailed pics and information. This should help me out with this situation. I'm not sure I have those brackets to extend. I have the crossmember but don't remember taking those brackets off the frame. But are you saying the 4" is from the bottom of the frame to the trans cross member flange? I can make up something to bolt the crossmember to if that is where my 4" dimension should be located from.

Thanks again,

B.Sharp

06-14-2007, 02:02 PM	#26
b.sharp Registered User Join Date: May 2006 Location: Frankfort, Kentucky Posts: 508	Re: Lurker OrrieG Progress Pics Thanks for posting the detailed pics and information. This should help me out with this situation. I'm not sure I have those brackets to extend. I have the crossmember but don't remember taking those brackets off the frame. But are you saying the 4" is from the bottom of the frame to the trans cross member flange? I can make up something to bolt the crossmember to if that is where my 4" dimension should be located from. Thanks again, B.Sharp Last edited by b.sharp; 06-14-2007 at 02:04 PM.