[farmallboy15]

Thanks for the compliment! It's a 2" Tuff Country from ORD. ORD greaseable bushings and HD shackles. I have the original 2" block under the rear. I wish there rear was still a little higher...


Another thing about the knuckles, if you want to throw some new bearings, u-joints and ball joints in you would have to tear it down to the same point so that might justify the effort... I lucked out with a Dana 60 rear. On the U-bolts and shackle bolts, pull out the angle grinder or fire wrench. It's alot easier.