Quote:
Originally Posted by burnin oil
The oil sending unit line is right at the top of the engine block just behind the surface the bellhousing hooks to. O bet you kinked it or pulled it loose when removing the vacuum line for the modulator.
|
No the oil sending line is fine, and the oil was leaking on the side of oilfilter..but I'll double check.
Quote:
Originally Posted by AussieinNC
I think you are missing the nut that clamps the lower filter plate to the upper plate....
Without the nut, the plate will leak....
|
I was thinking the same thing..but it's never been there as far as I know and has worked fine, besides you tighten it down when screwing on the oilfilter right?. what would cause it so suddenly leak, just by replacing the transmission?
Quote:
Originally Posted by kwmech
Neither one of those bolts is correct. The bell housing bolts should be 1-1/4'' long. The short one is only going to grab about 3 threads
|
Thanks, thats definetly something to look at.