01-17-2021, 11:01 AM
|
#9
|
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
|
Re: Venting....
Quote:
Originally Posted by ChevyRacefan
How is this going to fix the leak inside the cab? If you are getting fumes in the cab you have a leak somewhere.
|
I have been looking for signs of leakage and haven't found any. The tank is dry no sign of a leak. That's what I don't under stand about this. The tank never had problems before I had it cleaned. The smell before was minimum at worst. Now when it's full it will knock you down when you open the door after sitting a day. The only thing changed is the old sending unit had the hard line all the way out under the cab floor, now it's fuel injection rubber hose line. New seal also. I suspect the seal on the sending unit, when I first installed it I had a gas gauge problem and I tapped the lock ring back a bit and the gauge started working so I left it. I may try tapping it back fully down again. But it's not loose by no means just not fully seated though.
There are several threads on this.
http://67-72chevytrucks.com/vboard/s...d.php?t=666215
http://67-72chevytrucks.com/vboard/s...d.php?t=390464
http://67-72chevytrucks.com/vboard/s...d.php?t=624413
http://67-72chevytrucks.com/vboard/s...d.php?t=624413
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71
Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour
http://upstategmtrucks.com/
Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!
LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
Last edited by Andy4639; 01-17-2021 at 11:31 AM.
|
|
|