01-18-2021, 11:05 AM
|
#16
|
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
|
Re: Venting....
Quote:
Originally Posted by ChevyRacefan
Add a 2nd clamp to the steel line coming out the floor. With the screw drive 180* from the other clamp.
It might be the photo, but that pass side lower corner of tank looks damp.
 |
There are two clamps on both connections on it 180* out now. The floor is dry.
Quote:
|
If it were me, I would bend a new steel line all the way up to the sender to all I have to use is a rubber hose about 2-3'' in length instead of the 16-18'' that is showing there.
|
I have thought about that also just haven't taken the time to do it.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71 
Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour
http://upstategmtrucks.com/
Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!
LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
|
|
|