Quote:
Originally Posted by Suburban_Tyler
So the lower control arm has to be changed or can just the lower ball joint be changed? I see the taper is different on the two. Is the lower ball joint you used from a 88-98 or 73-87? I want to do this set up to my suburban.
I was reading on another forum that a guy used 1 ton lift spindles and switched to 8 lug. Any info on swapping to 8 lug? Of course the rear end is easy enough
|
do you know whats different about the lift spindles, for 1/2 tons , and 1 tons? If there the same then all you need is different rotors that are 8 lug, if there different then you need 1 ton lift spindles, and 8 lug rotors.