Quote:
Originally Posted by Ramiro0727
So I have United Pacific LED lights all around and my turn signals don’t work when my headlights are on but when they are off the turn signals work but as soon as i flip the switch the brake lights get bright as if you’re stepping on the brakes and don’t blink at all. I added 2 grounds in the back off the bed to frame and one off the block and frame.
Thanks ,
Ramiro
|
I went through this problem with the lights being fully lit like the brake lights were on when you turned on the headlights. The UP flasher did not fix my issue. I ended up wiring in a dummy 1157 plug into the rear harness to add resistance to the circuit and all works well now. They also sell resistors you can wire in that will do the same thing. Now the UP flasher should help with your turn signal issue though. I had a thread on this in the electrical section about a month ago.