The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

76/85 Truck · 10-21-2010, 10:53 PM

When I first bought my truck (about a year and a half ago) the box had some surface rust on both sides of the wheel opening, and the driver side (closest to the tailights) had some lifting. Now, the first layer (I think it is the first layer.. i thought it was paint lifting, but when I try to chip it off it bends, so it must be metal) is really starting to lift now, and the second layer is cracked. I'll try to get some pictures.. sorry about the bad description. But what should I do? I'll get some pictures in the morning. Thanks!!!

10-21-2010, 10:53 PM	#1
76/85 Truck Registered User Join Date: Jun 2010 Location: Libby, MT Posts: 163	Rust is getting worse!!! When I first bought my truck (about a year and a half ago) the box had some surface rust on both sides of the wheel opening, and the driver side (closest to the tailights) had some lifting. Now, the first layer (I think it is the first layer.. i thought it was paint lifting, but when I try to chip it off it bends, so it must be metal) is really starting to lift now, and the second layer is cracked. I'll try to get some pictures.. sorry about the bad description. But what should I do? I'll get some pictures in the morning. Thanks!!! __________________ Rich My first truck!! 1976 Chevy 3/4 ton Camper Special and a 1985 GMC body. Has a 350, 4 BBL Edelbrock, with a Turbo 350, and NP205 T-case. Last edited by 76/85 Truck; 10-21-2010 at 10:54 PM.