The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - '78 K20 to C10. Almost 20 years in the making.

cruizin01 · 11-20-2017, 10:25 PM

struggled tonight. feel like I went back a couple steps.

while mocking up the holes for the swaybar bracket I realized the 4x4 crossmember was gonna be in the way of the new swaybar from RideTech. So I decided I would try to fit the 2wd one. It doesn't fit the way it did with the 2wd frame. So then I thought maybe I could remove the 4x4 sway bar brackets and be able to reposition the 4x4 one. Its slightly better but is still gonna need some work. I also need to make sure the steering components aren't in the way if I move the crossmember an inch or two rearward. ugh.

11-20-2017, 10:25 PM	#32
cruizin01 Registered User Join Date: Mar 2016 Location: Cbus, Ohio Posts: 290	Re: '78 K20 to C10. Almost 20 years in the making. struggled tonight. feel like I went back a couple steps. while mocking up the holes for the swaybar bracket I realized the 4x4 crossmember was gonna be in the way of the new swaybar from RideTech. So I decided I would try to fit the 2wd one. It doesn't fit the way it did with the 2wd frame. So then I thought maybe I could remove the 4x4 sway bar brackets and be able to reposition the 4x4 one. Its slightly better but is still gonna need some work. I also need to make sure the steering components aren't in the way if I move the crossmember an inch or two rearward. ugh.