[Trackman101]

Nothing to exciting. Built a couple brake lines to complete the installation of the rear brakes. Tweaked the emergency brake cables to work with the Wilwoods.
Measured twice and ordered an aluminum driveshaft.I should have it next week. The output of the transmission is 3 degrees down. That's the best I could get it. The rear is 2 degrees down without shims. I will leave it for now and adjust if needed after a road test.
Mounted the supercharger coolant pump and routed the lines. It fit very nicely where the old steering box was.
I am starting to design the cold air intake and radiator fan shroud set up. The tube and the shroud are fighting over the same space so it's going to be tricky.