The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**CC69Rat** · 07-26-2013, 08:09 AM

Is the bolt (the part you got out.. )threaded on the end or is it smooth like the ones in the pictures on this site?

http://www.fabbriassociates.com/kitinfo.html

I just have a feeling the end of your bolt is still in there with about 2-3 threads on it. If the bolt is in fact out, most of the time the pin will move side to side .. easily enough you can push them out with your finger. Usually that bolt breaks off about 2-3 threads up from the bottom where the threads stop. It's an odd lookin bolt no doubt.

This kit is awesome. I have no connection with them at all, just saying this kit saved me from a lot of time and frustration. I'd go ahead and get a new bolt too.

07-26-2013, 08:09 AM	#30
CC69Rat Senior Member Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,205	Re: Rebuild...(pending a name) Is the bolt (the part you got out.. )threaded on the end or is it smooth like the ones in the pictures on this site? http://www.fabbriassociates.com/kitinfo.html I just have a feeling the end of your bolt is still in there with about 2-3 threads on it. If the bolt is in fact out, most of the time the pin will move side to side .. easily enough you can push them out with your finger. Usually that bolt breaks off about 2-3 threads up from the bottom where the threads stop. It's an odd lookin bolt no doubt. This kit is awesome. I have no connection with them at all, just saying this kit saved me from a lot of time and frustration. I'd go ahead and get a new bolt too. __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)