The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Single wall top -Hold down bolts

**amcgeh01** · 09-15-2020, 11:23 PM

I agree with Pat, use anti-seize or teflon tape as they call it. Make sure you use a tap and run it through all of the holes and across the pillar top frame and that will make installing and removing a dream. The last thing you want is a bolt seizing up on you. USE Grade 8 bolts and nuts as well..

I believe Mark at MotorCityK5 sells them as a kit along with all the other bolts you need for the visors, etc... real nice guy to do business with and is willing to answer questions as he is making a host of parts for our Jimmy's and Blazers..

09-15-2020, 11:23 PM	#3
amcgeh01 Senior Member Join Date: Jul 2009 Location: SoCal Posts: 206	Re: Single wall top -Hold down bolts I agree with Pat, use anti-seize or teflon tape as they call it. Make sure you use a tap and run it through all of the holes and across the pillar top frame and that will make installing and removing a dream. The last thing you want is a bolt seizing up on you. USE Grade 8 bolts and nuts as well.. I believe Mark at MotorCityK5 sells them as a kit along with all the other bolts you need for the visors, etc... real nice guy to do business with and is willing to answer questions as he is making a host of parts for our Jimmy's and Blazers.. __________________ ******************************************** In-work on my 5.3L/4L65E/NP208 case conversion into a 1972 GMC JImmy 4x4... Not as simple as it looks folks..