Quote:
Originally Posted by Ozzy2013
I have a question about the 1995 big block alt they have a four pin plug can they be converted to 1 wire ?Or do you know how to hook it up with the four wire plug?Thanks and can i get a price on a Bigblock with ac kit?
|
The GM 4-wire versions cannot (and should not) be setup as a 1-wire. I suggest after converting to an internal regulator you should solder a 100-ohm resistor on the L wire and run the remote voltage sense lead to a common 12V junction as well as upgrading to an 8ga charge lead. You can also run a 10ga battery lead either directly off the charge post from the alternator or from the junction.