View Single Post
Old 05-18-2014, 10:29 AM   #104
ryanroo
Senior Member
 
ryanroo's Avatar
 
Join Date: Apr 2004
Location: sw colorado
Posts: 2,720
Re: 86 chevy crew cab 12 valve swap

Quote:
Originally Posted by 84chevyguyid View Post
I checked the caster setting like you told me and I have 5.5, should be good. Didnt know what I might end up with since I built my own brackets and used the 52" springs. Spent a little more time on the sway bar bushings with no luck. The brackets for the rear bags came fri and i was able to use them with a few mods and got the rear bags on yesterday. With no box or load on it takes 25 lbs of air to lift it 2-3 inches. The level valve works good, pretty cool to give it air and watch it do its thing. Simple things for simple minds... Now on to the front ones!
Haha, i've been enjoying the air bag game for a while now. i need to mount my controls, but i've had air in the bags several times and played with dumping it and looking at ride heights/etc. i might be in that simple minds category too!
__________________
72 K20 12v build
72 K20 "parts truck"

ryanroo is offline   Reply With Quote