The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

vince1 · 08-25-2019, 02:15 PM

redheadsteeringgears.com
rochauto.com

I just removed the 6 cyl pump and put the pump and hoses from a 79 (during my V-8 conversion) and the hoses fit to the box perfectly. Back when I first put on the PS I used the collapsible shaft from a 67 to replace the solid 66 shaft. But who knows if that stuff I got from the 67, including the box, was original to the truck or not. Not me for sure.

08-25-2019, 02:15 PM	#2
vince1 Registered User Join Date: Jan 2013 Location: Calgary Alberta Posts: 1,164	Re: 1965 c10 steering gear box redheadsteeringgears.com rochauto.com I just removed the 6 cyl pump and put the pump and hoses from a 79 (during my V-8 conversion) and the hoses fit to the box perfectly. Back when I first put on the PS I used the collapsible shaft from a 67 to replace the solid 66 shaft. But who knows if that stuff I got from the 67, including the box, was original to the truck or not. Not me for sure. Last edited by vince1; 08-25-2019 at 03:01 PM.