|
Re: What did you do to your Blazer/Jimmy today?
Quote:
Originally Posted by colgad
I ended up taking them to NAPA and they pressed them out for $20! Not to bad. But I ended up having to buy longer studs $4.00 each so I could have beat them out and saved $20! And then I had them press them back in, yea another $20, still not bad.
Finished the brake upgrade today, seems like it works!
70 Jimmy now with 4 wheels disk!
Thanks for the assistance!
|
You never know how hard it's going to be until you try and start beating on them. I used the same studs but mine must have been longer. My axle came out of a 81 k30. Hopefully you won't have to change the master cylinder. All I had to do was gut the rear part of the prop valve so the residual valve wasn't holding pressure to the rear brakes.
__________________
72 3/4 ton blazer. 5 inch lift on 35 inch tires. 355 corvette engine with crane roller rockers, rv cam, edelbrock carb and intake with one inch spacer. Thrush Headers with flowmaster 40 duels. 4speed sm465 manual. 4 wheel disk brakes with Inboarded rear shock prerunner style mounts and shocks.
|