The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Rokcrln · 03-29-2006, 09:36 AM

Thanks guys! I am open to any input anyone has.. Mike as far as that brace you mentioned yes it is the one variable item in the parts list. And in the directions it is stated to only worry about aligning one end! As far as the angel I figured most guys are using a chop saw for cutting and you know as well as I do trying to cut a 47.54321* is not real critical when your rod or wire will fill the small gap. Anyways guys I look forward to you using your Dollys!

Kevin
LFD Inc.

03-29-2006, 09:36 AM	#3
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: Rokcrln's Tip & Flip dolly Thanks guys! I am open to any input anyone has.. Mike as far as that brace you mentioned yes it is the one variable item in the parts list. And in the directions it is stated to only worry about aligning one end! As far as the angel I figured most guys are using a chop saw for cutting and you know as well as I do trying to cut a 47.54321* is not real critical when your rod or wire will fill the small gap. Anyways guys I look forward to you using your Dollys! Kevin LFD Inc.