Quote:
Originally Posted by SKELLY4x4
Wow, wealth of information here. I am a little bit confused though. The mirrors I have are not stock and I get that. They are very nice however and I would never remove them because they work and do their job. The truck shown with these same type of mirrors is not a square body. It appears to be a 67-72. So if my truck is a custom camper what type of options would it have had? I would like to add the badge but where does it go? Here is my truck anyways....
|
Like I said your mirrors appeared to be the camper mirrors from a square body. This picture clip is a 76 and shows the bent upper arms. Also shown is the smooth back of the later style camper mirror heads that were not visable in your earlier pictures. The DF2 mirrors in my first post are on a 71 and were to show the correct relative locations. Here is a thread where I posted up the factory location information for the DF2 mirrors at post #10.
http://67-72chevytrucks.com/vboard/s....php?p=6244380
The Z81 option required specific equipment and below is the data book clip showing the requirements for a 72 K20.
Being as your truck has the Z81 option it should have the emblems and as a 72 they would be on the doors. Fremont ("Z") built trucks used the standard location at the aft edge of the door. In addition your truck would also have had the "Custom/20" and the forward "8-350"(under the marker) fender emblems. This link will have more information than you probably ever wanted to know about them.
http://67-72chevytrucks.com/vboard/s...d.php?t=579296
Finally since you might ask, the B85 belt molding set was also present on your truck. If you want to see some specifics on that look here.
http://67-72chevytrucks.com/vboard/s...d.php?t=572206