Quote:
Originally Posted by BossHogg69
Here are the tubs mocked up in the bed before I had it blasted and primed. I may section them a few inches, since the tires don't take up that much room, but I haven't decided yet. It also depends on how the wood works out with where the tubs bolt down to he bed.
|
Adam When I tubbed my '67 I sectioned the wheel houses 3 inches to bring the inside of the tubs flush with the outer edge of the frame. If you line up the inside of the tub with the bed bolts, you can see theyare just at the edge of the frame. 3 inches keeps them away from the edge of the bedboards with enouch margin to keep from weakening the boards too much.