L
Both cowl bottoms were cut/ bent to heck for the speakers so I cut the spot welds on both sides and straightened/ repaired them. I still need to weld them back in but they both fit nicely.
The lower firewall on the passenger side separated from the side of the cab. I assume because the lower Seam is rusted out. At any rate I'll plug weld it back together when I put the front floor pans in. IVe decided that I'm just gonna patch this floor up. The supports are still mostly intact so I'll patch it up rather than replace it all.
I cut the rockers off on both sides to see what was gonna need to be replaced. Not really any surprises. Both front pillar tips are surprisingly really solid with minor surface rust. The rears... Not so much I'll have to patch them.