|
Re: 1952 Project 1433
some rotors are held on with a tapered head screw between the studs. What were you using for the bolt removal idea? how could you bend the backing plate when the bolt technique is supposed to push up against the axle face?
__________________
52 Chev 1300,55 235 40 over, 848 head, dual Edelbrock intake, Fenton headers, CW 32/32 carbs, 251 cam, HEI, T5 Trans, 3.23 rear, 235/75/r15 rubber.
If it aint broke I still try to fix it!
|