The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

C.I.Blazer · 10-06-2019, 06:58 AM

Yes! Thanks jarros44sr. I have now learned 12v wire from pump+ to relay in the engine compartment, ground from pump- to frame, and single wire from sending unit to gauge.

Still trying to understand how the vent next to the filler tube works...

Thought I would try and get all the wires and tubing run before I re-install the engine and transmission so access is easier.

10-06-2019, 06:58 AM	#5
C.I.Blazer Registered User Join Date: Aug 2019 Location: WA State Posts: 186	Re: Boyds EFI Tank Install Questions Yes! Thanks jarros44sr. I have now learned 12v wire from pump+ to relay in the engine compartment, ground from pump- to frame, and single wire from sending unit to gauge. Still trying to understand how the vent next to the filler tube works... Thought I would try and get all the wires and tubing run before I re-install the engine and transmission so access is easier.