Had a nice long Labor day weekend to work, finish welded the 1/8 rod on passenger door gap and ground smooth followed by epoxy and 2K high build on door and tailgate. Mounted the bed on the rotisserie and final blocked that and sprayed blue but the paint came out like absolute crap. Dry spots and several areas where I mush have missed heavier grit sanding marks so those are visible through the paint. I may have used too hot of reducer as well. So I'll try wet sanding the bed with 600-800 and do another 2 coats of medium blue.
The lower insides of the bed will get raptor liner.
Next round of work should have the doors and tailgate painted, bed repainted...and at last....final assembly
