The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

kipps · 09-23-2020, 01:56 PM

I've got two weatherpack connections to make on this truck. One is the reverse switch on the 1997 nv4500, and the other is the 4wd switch on the 1991 np241c.

They both look similar, but RockAuto is showing different part numbers for the pigtails. I'd rather not pay RockAuto's inflated prices, and just buy the individual bits on Mouser, since I'll be directly pinning them into the harness anyway.

Do I just grab any random two-pin male weatherpack connector, or do I need to do some more research?

Sorry about the scratchy pics. They're both from an older flip phone, and the reverse switch(first pic) was a lucky shot between the trans and the floorboard.

09-23-2020, 01:56 PM	#1
kipps Registered User Join Date: Jul 2014 Location: North-central Virginia Posts: 1,099	Are all weatherpack connectors the same? I've got two weatherpack connections to make on this truck. One is the reverse switch on the 1997 nv4500, and the other is the 4wd switch on the 1991 np241c. They both look similar, but RockAuto is showing different part numbers for the pigtails. I'd rather not pay RockAuto's inflated prices, and just buy the individual bits on Mouser, since I'll be directly pinning them into the harness anyway. Do I just grab any random two-pin male weatherpack connector, or do I need to do some more research? Sorry about the scratchy pics. They're both from an older flip phone, and the reverse switch(first pic) was a lucky shot between the trans and the floorboard. Attached Images __________________ 1987 C6P V20 truck, 2010 LMG 5.3, AFM delete, 2010 Camaro exhaust manifolds, 1997 nv4500, 1991 np241c, hydroboost, 2005 14bff axle & driveshaft, drop-n-lock gooseneck, 4.10 gears, stock suspension, rims, and tires. Still a work in progress. Any questions or suggestions are welcome!