View Single Post
Old 11-28-2010, 04:27 PM   #77
Bugeyev8
Senior Member
 
Bugeyev8's Avatar
 
Join Date: Aug 2009
Location: San Leandro, Ca 94577
Posts: 854
Re: My 1962 C10 Build Thread "Grandpa's Truck "

Got the Captain Fab kit all installed today, works great, I used the 62 kit with no clutch and a 98 Chevy 1500 dual diaphram booster, the master is a 74-81 Chevy C10 power disk brakes, pushrod is the stock one cut down and a coupler was made to join the two, I used 2 set screws and ground a dimple to assure it won't move, the whole thing is captive anyway and will not move even if the allens fall out, I used some rope caulk behind the bracket to insure a good seal, please excuse the green wire for the tach...it sneeked behind the pedal somehow rather than pull the whole assy apart I will just disconnect it from the dist and re run it, everything will be taken apart and firewall painted when I get the time and cash, here are some pics for you
Attached Images
     

Last edited by Bugeyev8; 11-28-2010 at 04:28 PM.
Bugeyev8 is offline   Reply With Quote