Quote:
Originally Posted by Steeveedee
I have yet to get the pin out of the hinge. Guess I'll spray some more penetrating oil on it and have at it again.
|
I have to ask, sorry -- are you able to drive the pin part of the way out, then it won't move any more? If so, I fought that battle a few years ago. Here's what I found:
The hinge has a 1/4" diameter hole top & bottom, but the roll pin is 3/16". If you try to drive the pin out with a 1/4" drift, you'll be stopped by the 3/16" section at the center of the hinge.
A smaller drift, 3/16" or less, will drive the pin out. HTH, good luck!