Re: *Turn Signal Not working*
Ok....Got my lock plate compressor this morning and got the plate removed. I can not get the plug at the bottom of the steering column to come up through the column. I'm thinking the other plug which is not being used it causing the turn signal plug to get wedged in the column. Can it be cut off so I can pull it out of the column to give more room for the turn signal plug to come through the column? Just not sure if there are other wires on the other side of the turn signal lever going back down the column.
Last edited by Zippi; 04-06-2020 at 10:28 AM.
|