The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 2006 Silverado body swap/frame(chassis) swap 4.3 2wd to 4.8 4wd

NastyBuzzard · 11-29-2014, 09:19 PM

This was a lot of fun!

Cut hole for manual tcase shifter.

TADA!! 2006 4.3 2wd to 2006 4.8 4wd chassis/body swap

Trying to figure out what lift is on it or if torsion bars are cranked to ridiculous max.

Front fender height. Minus about 1/2" because not set all the way down. The rear measure 39 1/2" on 32" bald tires and the front is sitting on 35" bald tires.

Still gotta hook everything back up. See what wiring combo it will take to start it

11-29-2014, 09:19 PM	#10
NastyBuzzard Registered User Join Date: Oct 2013 Location: Saluda, SC Posts: 1,276	Re: 2006 Silverado body swap/frame(chassis) swap 4.3 2wd to 4.8 4wd This was a lot of fun! Cut hole for manual tcase shifter. TADA!! 2006 4.3 2wd to 2006 4.8 4wd chassis/body swap Trying to figure out what lift is on it or if torsion bars are cranked to ridiculous max. Front fender height. Minus about 1/2" because not set all the way down. The rear measure 39 1/2" on 32" bald tires and the front is sitting on 35" bald tires. Still gotta hook everything back up. See what wiring combo it will take to start it __________________ 1988 GMC R3500- Cut Brothers 4WD Conversion Kit, 6.5 TD NV4500/NP208 D60 14BFF 2020 1500 Silverado 3.0 Babymax 2002 2500 Silverado- 6.6/ Allison 2010 CTS V- The "NastyBuzzard" 1979 Trans Am - Eventually getting 6.0/T56 swap with boost