The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**rharris** · 03-17-2017, 05:40 PM

If anyone has any experience with the following I would greatly appreciate it before sending the wheels off to the paint shop.

I ordered a set of 15x8 wheel vintique 62 steelies for my 72 C. Backspacking is 4.25" and offset is -6mm. In a quick no tire fit the rear seem fine. However, the front look like it may be too tight when I get the tire on. I have a set of 275/60's that are on it all four corners with aluminum 3 7/8 backspacing with no issues. Truck is currently stock, but may get a set of 2.5" drop spindles.

03-17-2017, 05:40 PM	#1
rharris Senior Member Join Date: Apr 2013 Location: Pottsgrove PA Posts: 560	Max backspacing 71/72 C10 If anyone has any experience with the following I would greatly appreciate it before sending the wheels off to the paint shop. I ordered a set of 15x8 wheel vintique 62 steelies for my 72 C. Backspacking is 4.25" and offset is -6mm. In a quick no tire fit the rear seem fine. However, the front look like it may be too tight when I get the tire on. I have a set of 275/60's that are on it all four corners with aluminum 3 7/8 backspacing with no issues. Truck is currently stock, but may get a set of 2.5" drop spindles.