Quote:
Originally Posted by cppursell
Well, I have tried two new gas caps, one that locks and that didn't work, then the one I'm using now which has one thin rubber gasket. I can certainly try to create a thicker make-shift gasket.
I still think your original idea of replacing the filler tube would work. I would need to cut off my existing filler tube, then find a replacement tube and join with the rubber neck hose. I sent your friend an email to see if he has one.
Thanks!
|
I drilled and tapped mine just inside the cab and ran a vent hose down through the floor. I put a check valve from a boat on it so it bleeds pressure but not gas.