I used Summit teflon braided lines from the tank to 3/8" aluminum hard lines inside the driver side frame rail to the filter...
then teflon braided again to the pressure regulator......
then teflon from the regulator to the fuel rail
I flared the aluminum for 37º -6 AN fittings using Eastwood turret flaring tool
put a junction here in case I need to drop the tank
ordered some industrial tube clamps to secure the hard lines
Aeromotive replaceable filter housing
(not as close to the exhaust pipe as it looks in the picture)
teflon braided lines to the Aeromotive regulator
Fabbed a bracket to bolt to the head