[tubbedII]

The tank wasn't attached in the stock location...it was actually sitting in the tub behind the bench, so I called up Boyd's and had a nice aluminum tank sent out...after installing it and wiring, the gas gauge finally worked too!

The actual plumbing of the filler neck was a chore though...it was over a year ago, but I remember running a T off the vent for a motorcyle check valve to allow the pressure to release as well as a one going back up to the neck for filling. Also, the filler neck off the truck and to the tank were different sizes, so I had to use reducers to get it all to work. It all seems to be ok because I can fill up the tank at the pump without any overflow issues!

Sorry...never took any pics of the tank installed...