Quote:
Originally Posted by sduckworth13
That's what I did when I did a 4 1/2 front drop on my 67 GMC. I moved the sway bar forward and removed the frame mounts for the sway bar and just used the brackets that came with the bushings to mount the sway bar to the frame. But I like your idea about bending it to the correct angle to fit.
Posted via Mobile Device
|
I mocked up the forward position for the bar and it actually looks pretty decent. When I ran into this problem on the silver truck, the fix was much easier. I only needed to move the ends inward about 3/4". These would need to move a full 2" inward to allow the frame brackets to use the holes already in the frame.
Were there any side effects from moving the bar forward, Scott?